Should be in the suspension section.

27mm to remove the bolts on each end of the track bar is what I used or SAE equivalent.
1.25 inch crows foot to tighten the jam nut. Pipe wrench works better.

Torque wrench that goes up to 225 ft lbs.

 

Thanks. I read your post about your trouble with the track bar loosening up. Hoping I don't run into the same thing.

 

I think if you know it upfront that it can be an issue you will likely have better luck because you will be prepared. You will likely be fine.

 

Read your instructions from Carli.

 

I think the idea was to have everything he needed tool wise prior to the arrival of th suspension. If he was to read instructions that came with the kit he would already have to have the kit, which would be opposite of what he was trying to get accomplished. However, there may be instructions on Carlis web page?

 

There are indeed instructions online. I misread and thought he had everything there waiting on install.

Carli Suspension Components and Lift Kit Parts for Dodge Ram 1994-2012

Click on the part, there's a link to instructions.

 

Yeah, I read the instructions online. They don't tell what size tools are required. Just wanted to have everything I need before the suspension kit gets here.