SDX or Scheid

 

x 2 for SDX

southerndieselx.com

 

x3 for SDX, they build injectors to westons specs

 

thanks ended up giving them a call going with a set of 5x16 should be all i need and for a good price

 

4X for SDX, good set that is what I have not bad on the street. little hazy when cold but does clean up when it warms up.

 

what all are you doing to your truck that you need 5x.016 injectors?

 

5x.014s have done 800+hp.

x2, unless your trying for stupid HP numbers or running something more than a 2.6 turbo, a 5x14 injector will be plenty.

I got some 5x.014 ordered up from SDX cant wait to see the difference between his and my DDP 4's.

 

pulling it and street more less a weekend driver but eventually going with a set of twins 66/71 with a s480 or something close to that underneath it. Till then was going to run a #10 plate and put the 191dvs back in. The truck is still in the process of being built so i will have to see when i get it back on the road.

 

5x.014s have done 800+hp.

 

try scheid or industrial injection

 

DONT try II, unless you have them gone over, they are not the worst but they arnt the best either

 

DDP is what I would run. Flame suit

 

i called SDx and i had a hell of a time understanding them. haha

 

sdx are nice people i have a set of 5x.016s on there way as well:thumbsup:

 

JL Machine clean injector and big power with the right stuff done i run a 5x 14

 

BH10 keep us posted on how you like the sdx over the ddp 4 if your could. Thank you.

 

x2

 

x3 on that and i didnt order anything yet college is killing my money so just doing a little at a time and why would i go with the 5x16 is because later i am going to be throwing a large bottom turbo underneath the 66/71 and would rather not have to get a new set. and couldnt i just run more of a plate and smaller delivery valves till then j/w.

 

we are starting to get colder and colder up hear in Michigan, they do haze more and of course it take longer to warm up compared to just a month ago.