[megacabbed]

Need to know the size to the axle nut? Trying to remove the old hub assembly and install new one. When I changed the hub assembly on my 2012 I bought the 1”11/16 socket but on the 2014 I’m trying to change now it is way to big. Instead of buying multiple sockets figured I would see if anyone knows what it is.

 

[terb]

Need to know the size to the axle nut? Trying to remove the old hub assembly and install new one. When I changed the hub assembly on my 2012 I bought the 1”11/16 socket but on the 2014 I’m trying to change now it is way to big. Instead of buying multiple sockets figured I would see if anyone knows what it is.

So you just buy one socket at a time depending on what job you are doing?...

 

[megacabbed]

So you just buy one socket at a time depending on what job you are doing?...

Of something that size that I’ll never probably need again absolutely. But really thanks for the help there bud >

 

[ATC]

Most places around me will let you take a socket out to the parking lot to see if it will fit before you buy it (Northern Tool, Sears, Lowes/HD, etc.). I've done it with tools, shackles, hardware, and other random stuff for my oddball projects...

 

[megacabbed]

Most places around me will let you take a socket out to the parking lot to see if it will fit before you buy it (Northern Tool, Sears, Lowes/HD, etc.). I've done it with tools, shackles, hardware, and other random stuff for my oddball projects...

Good advice but Truck is already partially taken apart as I figured it would be the same as the 2012

 

[AirGrabber]

36mm or 1-7/16

 

[megacabbed]

1-5/16 is what actually ended up fitting mine

 

[AirGrabber]

Didn't mean to steer ya wrong. My earlier trucks have the bigger nut, my 13 had 36mm or 1-7/16, figured thatd be the same since it differed from the earlier trucks.

 

[megacabbed]

Didn't mean to steer ya wrong. My earlier trucks have the bigger nut, my 13 had 36mm or 1-7/16, figured thatd be the same since it differed from the earlier trucks.

Not a problem thanks for trying.