Dodge Cummins Diesel Forum banner

What scanner?

823 Views 5 Replies 3 Participants Last post by  dad2bike
hey guys just wondering what kind of scanners you guys are using to erase the egr codes before taking it to the dealer for warranty work or maintenance.
i was wanting something easy to use and cheap so i can get rid of the EGR unplug code after plugging it back in
1 - 6 of 6 Posts

· Retired Old Fart!
Joined
·
10,495 Posts
I was using my Scangauge2 until I started running the PMT.
You can erase codes by:
* doing the "key trick" on-off-on 3 times to read and 5 times to clear
* stop at your local auto parts store and get them to clear codes for you
* get a cheap scanner from parts store or even WallyWorld for $60-125

I like the SG2 (about $160)since it also functions as a trip monitor.
jkidd on this board reps the scangauge.
 

· Premium Member
Joined
·
8,859 Posts
hey guys just wondering what kind of scanners you guys are using to erase the egr codes before taking it to the dealer for warranty work or maintenance.
i was wanting something easy to use and cheap so i can get rid of the EGR unplug code after plugging it back in
go in all pissed off and say the stupid cel has been coming on.:lol4:
 

· Retired Old Fart!
Joined
·
10,495 Posts

· Registered
Joined
·
90 Posts
Discussion Starter · #5 ·
will just about any scanner that says obd2 and can readable be what i'm looking for found one called canobd2 3030 that is cheap

thanks for the replys
 

· Retired Old Fart!
Joined
·
10,495 Posts
will just about any scanner that says obd2 and can readable be what i'm looking for found one called canobd2 3030 that is cheap

thanks for the replys
If it reads CANBUS you should be good. canobd2 3030 implies that it does.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top