Dodge Cummins Diesel Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter #1 (Edited)
Just thought I would check in and post a few pictures of some projects we have had going on lately. These pictures are from a total of 3 custom engine/truck builds for the 2.6 pulling class.

Here is a picture of an all out competition 12v head, complete with an individual runner intake manifold


Picture of the intake milled off for port and polish


O-ringed head with custom valves


Intake plenum bolted on


Finding true TDC and getting ready to get everything timed in


24v head with dual valve springs and retainers, as well as our .120 wall HD push rods


5/8" Steel girdle installed with 14mm main studs


Custom cut and coated pistons


Motor #1 off the dyno cart and ready to go in the truck


Motor #2 on the dyno cart after being fired up for the first time


Custom water to air intercooler setup. We integrated to ice cooler into the weight box to make it more simple and also keep as much weight forward as possible






Working on the gauge setup
 

·
Registered
Joined
·
150 Posts
Discussion Starter #2
Our customer's first hook was last night in Cynthiana, Ky. He ended up in 1st place and did a great job of driving the truck for a first timer. Unfortunately it started to rain and the track was getting kind of sloppy, but still a good hook.

Here is a link to the video

 

·
Registered
Joined
·
150 Posts
Discussion Starter #4
Just thought some of you might enjoy seeing some of these pictures. If you have any questions please feel free to post in this thread or shoot us a PM.
 

·
Registered
Joined
·
3,262 Posts
Beautiful stuff man! Damn

Sent from my DROID RAZR using AutoGuide.Com Free App
 
1 - 9 of 9 Posts
Top