Dodge Cummins Diesel Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
136 Posts
When I installed my Fass I got the line off easily by using a flat screw driver to push one clip down while pulling slightly on the line and then went to the next clip while I still had pressure on the line pulling off. Once the line was on I had a hard time taking off the plastic clip holding the stock line on. Ended up using a die grinder to carefully cut a slit in it.
 

·
Registered
Joined
·
136 Posts
It was kinda a PITA getting in there at it but also try a pair of needle nose pliers to hold both clips down if the screw driver don't work
 
1 - 2 of 2 Posts
Top