Dodge Cummins Diesel Forum banner
1 - 5 of 20 Posts

· Washington Chapter Vice President
Joined
·
5,035 Posts
You will get more smoke with the the EGR on but it is not a ton of smoke. Once you remove the EGR, smoke is almost nonexistent. The EGR delete will throw its own codes but getting the Edge as you plan to do will clear it along with the DPF codes.
 

· Washington Chapter Vice President
Joined
·
5,035 Posts
I have yet to see any codes with the attitude set to clear and letting it clear them. You will see codes if they come up while driving. If there is something wrong with the truck you will know. My truck has not gone into regen since removing the DPF. The fooler box tricks it into thinking it is always passively regening which means no extra fuel is injected because the truck is running warm enough to keep it clean without it.

NOBULL: There is said to be Code Free Boxes shipping at the end of this month from BADP. That is probably what you are waiting for.
 

· Washington Chapter Vice President
Joined
·
5,035 Posts
I get almost no smoke with the EGR deleted. Before i did that i was getting more.

There is a few C&C guys that have pulled the EGR cooler off with no problems. I was waiting on some plates to remove mine and do a write up on it. Before that happens i may end up just putting a 5.9 manifold on and been searching for info on a twins setup.
 

· Washington Chapter Vice President
Joined
·
5,035 Posts
If it regens with the DPF delete you will see a white smoke. The smoke i am referring to is Black smoke that so many people like. I for one dont mind not throwing tons of black smoke.
 
1 - 5 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top