Cummins Diesel Forum banner

wait to start light

938 Views 7 Replies 4 Participants Last post by  Hoss50
ok guys been having the same problem seems like everyone else is with wts light coming on once truck is up to temp and running 65+mph or going up a hill with loss of power ... i replaced the injectors in the last 6 months with less than 3k miles on them so know its not that just replaced fca two days ago and still coming on ... hooked computer up to it and all pressure is good . rail pressure fuel pressure injector pressure all is good.. im not sure what else to do programmed truck back to stock and even ran pressure and all was still the same .... only mods are afe cold air 4in turbo back exhaust and smarty s-06pod
1 - 2 of 8 Posts
Check the injector tube torque before you rip everything apart too.
That is high return rate on the injectors. Search that code number and a lot of info will come up.

I had that code and the P1222 code. I needed new injectors to fix the problem.

Tube torque is 37-41lbs typically.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.