Dodge Cummins Diesel Forum banner

Valve Cover Gasket Question

495 Views 4 Replies 2 Participants Last post by  JosephJ86
Hi Guys,

I am adjusting the valves on my 99 2500 24 valve with 170,000 miles. When I took the valve cover off today, the valve cover gasket stuck to my valve cover. It doesn't appear to be damaged, but in all of the pictures I have seen the gasket is still on the block vs. the valve cover.

Can anyone provide any feedback on this? I am wondering my gasket should have stayed on the block or if it sometimes comes off with the valve cover?

Thanks in advance.
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.