Dodge Cummins Diesel Forum banner

Using Pvc As Part Of Intake

992 Views 3 Replies 4 Participants Last post by  R_Zachs
Is there any harm in using PVC elbow or pipe on a whistler style intake. Using 5.5" metal pipe after turbo elbow but on top of that I'm either going to use a 4inch pvc elbow or the stock rubber elbow and a pvc extention to the filter. Any harm in this? It dosent get that hot to melt it does it?
1 - 4 of 4 Posts

· Registered
1,231 Posts
just used a heat gun to make the first 90* off the turbo to clear the oil filter mount.
other than that no problems what so ever for 40k miles. i put it on around 121k now im at 165-70k

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.