[Kjeyer97]

Seeing if anyone knows the part number for a ujoint for the front driveshaft at the tcase. The truck is a 02 2500 HO with a 6 speed. All the part numbers i have found so far the ujoints have all cap locks to the outside. I need a ujoint that is 2 locks to the outside and 2 locks to the inside.

 

[cummins6sp5.9]

Both INSIDE amd OUTSIDE clips are NOT needed. Go to NAPA or wherever you choose and get the proper U-Joint. IF your yoke has the inside clip ring on the OUTSIDE edge of yoke then you need a outside clip u-joint.

 

[Kjeyer97]

My yoke doesnt have a recess for a clip. I need a ujoint that has the caps with a recess for inside clips. the parts store cant find me the right one.

 

[cummins6sp5.9]

My yoke doesnt have a recess for a clip. I need a ujoint that has the caps with a recess for inside clips. the parts store cant find me the right one.

Go to a different parts store then. :thumbsup:

 

[justin32094]

354-standard or a 270 super strength. I work at napa and just looked it up :thumbsup:

 

[justin32094]

Sorry didn't see that you need inside locking ^^

 

[justin32094]

Are all four caps the same size, and also whats the measurements from end of cap to end of cap? As long as the parts store your going to has some knowledge or at least common sense they should be able to do it

 

[Kjeyer97]

I went to a driveshaft shop n they found me the correct one. Its a 3R to 1330. Neapco part 2-1569