[Abro]

I’m installing new universal joints in the rear driveline of my 2003 2500 NV5600 4x4 quad cab short bed
I don’t like the way the clips are not sitting flush.
The u joint caps are pushing out against the clips .
I can get them to sit flush but the joint is too tight to install.
After a few taps to get everything moving freely, then the clips bow up again.
Am I being paranoid?

 

[rghavana]

need make sure right AAM ujoint, info posted in here can search for it.

 

[Abro]

They are Napa premium

I think I got it figured out
A few taps with a socket and the clips seem to pretty flush
Joint moves freely but not too loose

 

[Abro]

Napa part number UJ351A

 

[Babin Farms]

When installing the cups the yoke is being squeezed together. Probably need to try tapping(smacking) the inside of the yoke to help spread it apart to loosen things up.

 

[rghavana]

Napa part number UJ351A

Seems like right SKF made joint https://www.vsm.skf.com/us/en/products/UJ351A

Best joint IMO, experience, for harsh environments is Spicer life series,
https://8lugtruckgear.com/Drivetrai...dge-U-Joints/Spicer-5-3206X-U-Joint-p885.html