Cummins Diesel Forum banner

Twin Stick T-Case 90 diesel

4508 Views 7 Replies 4 Participants Last post by  pandacasserole
Hey guys, quick clarification question. if we have a factory diesel manual 1990 dodge W150 we should have a NP-205 right?

If so would this twin stick conversion work? Twin-Stick Shifters, 3-Stick Transfer Case Shifters for GM Chevy NP205, NP203, Doubler
... has anyone done this conversion?

Should I get the replacement pins if my shifting stick has slop in it?

also, this transfer case has an engagement sensor that is broken... apparently nobody has one, any ideas on where to get one?
1 - 1 of 8 Posts
you dont need the switch but you cant just leave it out.

you need to replace the switch with another ball/spring/cap. you can snag them out of ANY 205 as well as 203's.

you only need to modify 1 rail. not both, its actually very easy to do.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.