Dodge Cummins Diesel Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter · #1 ·
Hi all, here I am sitting in the garage, scratchin my head. I gotta head out first thing in the AM and to my suprise, my trailer wiring is not working properly. I have Got the ground, and left and right signal, but the electronic brakes, clearance lights, 12v, and the auxilary plug are dead. I pulled the wiring harness out of the bumperr and everything is hooked up properly. Is there possibly a fuse I am missing somewhere? All the lights work fine on the truck
 

·
Registered
Joined
·
124 Posts
Discussion Starter · #3 ·
Another bit to add. I unhooked the trailer brake controller, and checked to see if I had power there. I did have power, but only to one of the four points, and that was when the brakes were applied. I don't have a clue if this is right or not
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top