Dodge Cummins Diesel Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
227 Posts
Discussion Starter · #1 ·
OK I have my new trans pressure transducer and governor pressure solenoid. I'll pick up fluid and filter before I start. The pan gasket should be re-usable right? Anything else?

What tools will I need to have on hand before I start? I have basic stuff like drain pan, funnel, basic standard amd metric hand tools ,etc.. I'll bring my inch pound torque wrench home from work for band adjustment. Am I going to need allen wrenches or sockets or tor-x or inverted tor-x sockets? Anything else?

I just want to make sure I have everything before I start.
 

· Registered
Joined
·
498 Posts
My 04.5 has a reusable gasket. The filter has 3 torques bolts. 25 I think the rest of the bolts are torques or metric. Gasket scraper for the Governor gasket. You didn't mention but if not planning think about a drain plug to install in the pan while you are there
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top