Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 10 of 10 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I would like to upgrade tires and wheels but retain stock lift.How large can I go without problems?
2008 Ram 2500 4 x 4
 

·
Registered
Joined
·
2,796 Posts
you could squeeze 315s under there but i think it would look too crowded,,so on a stock truck i would a 33x11.5 inch tires on a 4.5 inch offset -18 backspacing wheel

i tihnk those are the right numbers
 

·
Registered
Joined
·
147 Posts
I run a 305\70\17 with no rub at all. It crosses to 34"
 

·
Registered
Joined
·
1,381 Posts
mine had 20's with 35's not leveled, only rubbed when turning and hittin bumps, i am current looking to sell my two sets of 35s and buy a set of 33s that should take care of the rub and 14-15 mpg
hope this helps

 

·
Registered
Joined
·
2,796 Posts
mine had 20's with 35's not leveled, only rubbed when turning and hittin bumps, i am current looking to sell my two sets of 35s and buy a set of 33s that should take care of the rub and 14-15 mpg
hope this helps

unless the tires are thinner they will still rub..but the MPGS will improve maybe 1 MPG
 

·
Registered
Joined
·
297 Posts
295s on stock are no problem and fill the well up pretty good.
 

·
Premium Member
Joined
·
1,612 Posts
i've got 325/60's on my 18x9 revolvers only rubs when i have the wheel cut all the way and hit a bump... did have to do some very light trimming
 

·
Registered
Joined
·
75 Posts
I have 295's on my 3500 srw with no level kit. I think they look good, and I have no rubbing.
 

·
Registered
Joined
·
306 Posts
1 - 10 of 10 Posts
Top