Dodge Cummins Diesel Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
640 Posts
That tall of a tire is going to be close. If you have a +18 offset that helps, but by the time you air that tire up it will be all of 34.5 inches. That is tight for stock height in my opinion.
 

·
Registered
Joined
·
640 Posts
I believe 5.71" backspace is the equivalent to a +18 offset. If you have the fenders pinned and are confident that tire height won't be an issue those wheels should be fine. You won't get the same look as a -12 offset though. That's a big difference in how far the wheel sticks out of the fender and how deep the dish is on the wheel.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top