time for twins
-
It's time to cast your vote for March's Cummins of the Month!
1 - 4 of 4 Posts
Joined
·
6,489 Posts
First off your probably gonna need an external gate for that big of sticks and a 35 on top.
Second, a 73-76mm compressor wheel will work good, just make sure to get one with a 22-27cm exhaust housing.
Second, a 73-76mm compressor wheel will work good, just make sure to get one with a 22-27cm exhaust housing.
Joined
·
1,759 Posts
your talkin a wastegate for the ht3b right.....
Joined
·
6,489 Posts
ht3b wont have a wastegate
the wastegate on the hx35 will be somewhat limiting depending on the power your trying to make. In your case with 240s, it may be a little much for the wastegate to handle. The waste gate needs to flow enough of the exhaust gases to keep the 35 from overspooling and to keep the egts down. You could also try a larger exhaust housing for the 35, but that will hurt spool up time as well.
the wastegate on the hx35 will be somewhat limiting depending on the power your trying to make. In your case with 240s, it may be a little much for the wastegate to handle. The waste gate needs to flow enough of the exhaust gases to keep the 35 from overspooling and to keep the egts down. You could also try a larger exhaust housing for the 35, but that will hurt spool up time as well.
1 - 4 of 4 Posts
