[Jeeptrash]

Does anyone know if the thuren 2 inch coils are still available? Or are the 3 inch coils the only ones and of course the 6 inch. But I want a rake still to my truck I am also gonna be doing a diy4x shackle flip kit in the rear with just zero rate blocks so like another inch over the kits normal hight.

 

[94_cummins]

the 2" should be available from CJC or strapt. theres alot more companys that have them, but both of the those guys are awesome to deal with. just give them a call. also, a i would do the DOR shackle flip kit, since it comes with the zero plate. that would give it 4.5" over stock.. so if you take out the block with new u-bolts you would be about 1" over I BELIEVE haha. its been a while since i did the math for it. but, with the once inch lift in the rear you should be able to go with a 3" coil and still have a slight rake.
oh yeah. and good job pickin thuren :thumbsup:

 

[Oscar P]

Jeeptrash, if you pull trailers, I have been advised to not do a shackle flip. Shackle flips reduce the effectiveness of the shackles ability to hold and control a load.

 

[94_cummins]

you can also flip the stock shackle.just need to replace the bolts and hardware. i plan on doing that. it will be 1" over stock. but i am going to replace the block with a degree cut to compensate for pinion angle.

 

[Jeeptrash]

So does anyone have any first hand experience with these coils? If so how much lift did you see and how much was the ride improved?

 

[98whitelightnin]

I just put a set in a couple weeks ago and they are great. I have a big bumper and winch and the truck sets about 1/2 lower in the front. I went with Thuren's overland shocks and they are a lot better than the rough country shocks they replaced. I called CJC and ordered everything over the phone with Cody or Cole.