Cummins Diesel Forum banner

throttle valve cable

13575 Views 8 Replies 4 Participants Last post by  Sutter1stgen
I installed the cable today and it made my fuel pedal hard as hell to press down. I pulled it out, lubed it up with roller chain lube and it moves fine. I checked the lever on the tranny and it moves great. It seems like there is alot of tension from the spring on the cable. My question is, why wont it move freely when installed? thanks Josh
1 - 1 of 9 Posts
When I did the throttle mod my tv timing was off. So I adjusted it alittle tighter to where it shifted perfect at mid and wide open throttle. It only shifted a little latemat partcial throttle. Nothing too annoying.

1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.