[lmorgan]

The stock temp gauge in my '92 isn't working. I thought I'd start with the sending unit, but I don't know where it is or how to change it. Any suggestions?

 

[my92d350]

the temp sender is on the drivers side back of the head. you should get the socket for the temp senders. sometimes it makes it easyer. with the socket just unplug the 1 wire on it and take it out with the socket and ratchet.

 

[Old 'n Rusty]

Most of the senders on Dodges will give you grief over time. Check them out long before you consider repairs based on their readings. Oil pressure is the one that you can count on failing.

 

[lmorgan]

Thanks

Thanks for the information. I'm not familiar with the socket the sender requires. Any suggestions?

 

[my92d350]

go to ur local a/p store and ask for either a oil pressure sending unit socket or a water temp. i know you need one for the oil psi sender but i think you can get the water temp out with a big socket. one of the other guys should know the size. if i think of it ill post it.