Dodge Cummins Diesel Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,023 Posts
Discussion Starter · #1 ·
Puked the Headgasket yesterday in the truck... im gonna throw a stock one in it next week to get by, but I just started a new job so im gonna start saving to do some motor work this fall/winter... im gonna make a list of whats on the "to do" list and im open to brands/dealers to get them from

Headstuds (prob haisleys)
Stiffer Valve Springs
Better Head Gasket
Nozzles (prob 120 or 150 horse)
Already got a turbo, but need a 5" downpipe and exhaust to go on with it
and probably send the head out and get it freshened up with valves and what not
Cam as well, open to suggestions, probably max spool but open to suggestions

Thanks!
 

·
Registered
Joined
·
2,397 Posts
H-11 or ARP 625 studs if you have the coin
Hamilton Springs
Billet pushrods
Extrude Hone nozzles
Hamilton Big stick cam

I'm using all those parts in my build :headbang:
 

·
Registered
Joined
·
1,023 Posts
Discussion Starter · #3 ·
whats the profile on teh big stick?? is it an all around cam or got a specific purpose in its design? also where can i get the billit push rods?
 

·
Registered
Joined
·
2,397 Posts
I went with the big stick 181/210. The best thing to do is get ahold of rich at doghouse diesel and see what he recommends for you.

I got my billet pushrods through Gus at Farmboys Diesel :thumbsup:
 
1 - 4 of 4 Posts
Top