[RickFox]

No block in the rear, coil cut out of the front on 305/50 20 420s

 

[RickFox]

rickfox that 2wd or 4wd

4wd, I get that question a lot.

 

[RickFox]

1/2 ton coils, 2" cut out of the block. Im thinking about going a little more though.... :thumbsup: 285/70/17's on a 10" wide rim

Yes Ian, LOWER!!!

 

[RickFox]

Rickfox love the stance man. I got a 95 2wd that I was gunna do 2" drop shackles, but if I take out the blocks in rear what are the consequences? That cant really be good for the axle. Also how much did you cut off the coils and did you take it from the top or bottom?

Thanks, I haven't had any ill effects of taking the blocks out of the rear. I don't know why it would be bad for the axle, gm's don't come with any kind of block in the rear.
I took one full coil from the top of my 4wd coils, I don't know if the 2wd coils are the same?

 

[RickFox]

 

[RickFox]

20x10 with 305/50/20, hope that helps.

 

[RickFox]

 

[RickFox]

Just some cheapie shocks from advance.

Rick

 

[RickFox]

How loud is that hoodstack when the gate opens? Does it rattle the crap out of the dash?

I don't know because I don't have my external gate setup yet. I'm going to guess it won't be louder than the hood stack. It doesn't rattle anything, and actually the hood stack isn't loud if you don't have the peddle mashed to the floor.

 

[RickFox]

Low and Slow is the only way to go!!

 

[RickFox]

Hopefully it can get some paint this winter, thanks for the compliments guys.

 

[RickFox]

Rick, how much drop is in the front and rear? I saw it over at Lavon's shop last time I was there.

I'm not too sure on the exact amount, but it has no blocks in the rear, and a full coil cut out of the front. I think that equivalates to around 4.5-5".
Thanks

 

[RickFox]

Who makes the traction bars?

I did, and had a buddy weld them for me.