Cummins Diesel Forum banner

stock lift pump, bigger lines.

1K views 8 replies 7 participants last post by  12valvefirefighter 
I tried 1/2" lines from the pump to the fuel canister with the stock (in tank) LP and the fuel pressure just dropped to about 1 PSI upon start-up. With the stock lines it was showing 11-12 PSI at idle, and with the Raptor and the 1/2" line its around 16-18 PSI.
Do not waste your time or money looking for band-aid fixes, do it right the first time and get a Airdog/Raptor or FASS unit, they are worth every penny.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top