Dodge Cummins Diesel Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1 (Edited)
Hello,
I have a new 2010 ccsb srw 3500st on order. I have my wheels and tires here waiting for the truck. I also have a Carli starter kit for it as well. My question is this. Carli and most others want 250-350$ for a stabilizer for the truck. I have found a Bilstein 5100 replacement for the stock unit.At $85 this seems just as good, what says you?
Thanks Rob:confused013:
look-- http://www.offroadwarehouse.com/products/sfID1/12/sfID2/156/sfID3/1190/productID/50579
 

·
Banned
Joined
·
1,844 Posts
Hello,
I have a new 2010 ccsb srw 3500st on order. I have my wheels and tires here waiting for the truck. I also have a Carli starter kit for it as well. My question is this. Carli and most others want 250-350$ for a stabilizer for the truck. I have found a Bilstein 5100 replacement for the stock unit.At $85 this seems just as good, what says you?
Thanks Rob:confused013:
look-- Off Road Warehouse - Shocks Bilstein Shocks 5100 Series Steering Stabilizers Bilstein 5100 Series Steering Stabilizer 07-10 Dodge Ram 2500/3500 4WD #BE5-H079-H0
bilstein is a good product and thats what carli's is ,,but one prob..?the end with the nut and bushing? isnt that for the old style tierod with the hole in it,,cause if it is,,then there no good cause the tierod s have changed..to a clamp style..wich the carli's cumms with that bracket..?
 

·
Suspension Specialist
Joined
·
2,781 Posts
Carli's high mount comes with a bracket and billet clamp to mount under your sway bar and directly to you drag link below the pitman arm.

Carli also has a Bilstein 7100s low mount for $185 that mounts in the stock location on the 08.5+ steering.

The 7100s are better quality have better performance and are nitrogen adjustable unlike the 5100s and other emulsion stabs.

 

·
Registered
Joined
·
84 Posts
Discussion Starter #4
Both?

Ban89,
So by the picture, are you running both? I did not see the low mount available on the carli website. I will recheck.
Thanks, Rob
 

·
Suspension Specialist
Joined
·
2,781 Posts
Yep. I'm running both. When I'm hitting 2 ft whoops at 60 + mph the bump steer can get pretty bad w/o them. LOL

The lowers are not listed on the Carli website. I'll PM you a link.
 

·
Registered
Joined
·
245 Posts
bilstein is a good product and thats what carli's is ,,but one prob..?the end with the nut and bushing? isnt that for the old style tierod with the hole in it,,cause if it is,,then there no good cause the tierod s have changed..to a clamp style
According to shockwarehouse the 5100 series for the 07-10 has "loop mount" in both ends.

Bilstein shocks and struts for cars and trucks - Shockwarehouse.com

Off Road Warehouse - Shocks Bilstein Shocks 5100 Series Steering Stabilizers Bilstein 5100 Series Steering Stabilizer 07-10 Dodge Ram 2500/3500 4WD #BE5-H079-H0


Both of these website show a different picture of the stabilizer and they also have a different prefix on the bilstein part number.
 

·
Registered
Joined
·
708 Posts
KORE all the way, proven over and over again!
 

·
Registered
Joined
·
5,240 Posts
Where are you located Rod incase your factory wheels come up for sale?
 
1 - 8 of 8 Posts
Top