Cummins Diesel Forum banner

Steering box brace with a suspension lift

1755 Views 11 Replies 5 Participants Last post by  johnstangl
I was wanting to put on a steering box brace to strengthen that area but I don't know if it will fit. I have an 8" suspension lift on a shorty conversion and had to relocate my sway bar with drop brackets so the horizontal part of my sway bar is 3-4 inches lower than the stock position. Does anyone have sway bar drop brackets and a steering box brace or know if they will work together? They only cost about $60-80 bucks but I wanted to see what you guys say so I don't waste money on something that won't fit.
1 - 6 of 12 Posts
Do you have sway bar drop brackets as part of your lift or did you just run longer end links?
Sweet...that's exactly what I needed to know! I'm gonna do it then...thanks for that info. 👍
Makes perfect sense. I was looking at some pictures of them installed on stock trucks and saw the horizontal part of the sway bar above the crossbar on the brace and was thinkin mine won't be above it like theirs, mine sway bar would have to be below the brace crossbar. Just didn't know if there was room for it to do that. But I know now...👍
Another thumbs up...👍 I'm ordering it today.
Just got it in the mail today...probably put it on tomorrow and see how it goes.
1 - 6 of 12 Posts