Cummins Diesel Forum banner

star wheel adjusting

1061 Views 4 Replies 4 Participants Last post by  STOKER-SMOKER
I got an hx-40 60/74/16 and #10 fuel plate and 4k gsk I will be installing tommorrow how much should i crank the star wheel and smoke screw for a baseline tune just wanting a starting point? thanks 98 215/440
1 - 1 of 5 Posts
Ya, find in there where it describes using the air compressor to set the starwheel, that will give you a good starting point. As for the pre boost, I remember reading somewhere to screw it in until the nut is flush with the allen head, but that seemed like a lot when I did it. So many more mods and tuning to do, haven't changed it yet. Everytime you change the preboost, you have to readjust the star wheel after.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.