Dodge Cummins Diesel Forum banner
1 - 1 of 1 Posts

· Cummins Whisperer
769 Posts
Try putting some light pressure on the gear shifter when you go over the bumps (assuming you have an auto). If it stops, I may be the shift linkage. I had a similar problem and it turned out to be a plastic bushing on the linkage under the truck. I rubbed a little grease on there and haven't had a problem since. Good Luck
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.