Dodge Cummins Diesel Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
86 Posts
Discussion Starter · #1 ·
I bought an Edge Ez thinking it would fit my 02, because it had 01 on the sticker(see pics). So I called edge to make sure and they told me ot was for 98.5-00s. I was under the impression that MAP sensors were like a circle triangular type. But this has the three flat connector on it (see pics). Any help is appriciated. Please share if you have an info.



 

· Registered
Joined
·
113 Posts
I can't help you but if it turns out you have the wrong one and this one is for a 99, I might be interested.
 

· Registered
Joined
·
73 Posts
I know quadzilla sells adapters, might check with them and see if they will work on your edge....they were only like $35 when I bought some to put a 98.5-00 adrenaline on my 01. I know this is 2 different brands, but it might work.

"Killing Time Using Tapatalk 2"
 
  • Like
Reactions: aallen24

· Registered
Joined
·
86 Posts
Discussion Starter · #4 ·
I know quadzilla sells adapters, might check with them and see if they will work on your edge....they were only like $35 when I bought some to put a 98.5-00 adrenaline on my 01. I know this is 2 different brands, but it might work.

"Killing Time Using Tapatalk 2"
I called them and thats when they told me it was for a 98.5-00 and they told it wouldnt work because of the different MAP voltages.
 

· Registered
Joined
·
86 Posts
Discussion Starter · #8 ·
I thought it was for an 01 or 02 because of the flat map plug but the edge tech said it was for 98.5-00 according to the part # even when it has 2001 on the sticker.what could have happend ?????? :banghead:
 

· Registered
Joined
·
270 Posts
That is an EZ for an 01, get the map adapters Edge sells them for 25 bucks

The 98.5-2000 is a round map sensor connection, that is the flat 3 which fits the 2001
I agree

Sent from my VM670 using AutoGuide.Com Free App
 
  • Like
Reactions: aallen24

· Registered
Joined
·
86 Posts
Discussion Starter · #11 ·
so it looks like i have one for an 01. but when i tell edge the part # they are going to tell me its for a 98.5-00 and it wont have an adapter. so if any one has the old part # for an 01 i will give them. the tech told me it should have an "A" or "B" after the EZD1000. thanks everyone for input btw
 

· Registered
Joined
·
86 Posts
Discussion Starter · #12 ·
i am correct to say that the 2 smaller plugs will go to the MAP when i get an adapter, and the 3 prong bigger plug goes to data link under the fuel filter with the cover on it?
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top