Dodge Cummins Diesel Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
554 Posts
Discussion Starter #1
Alright, I've been fighting with the Truck (and it's winning) about where to mount the Sending unit for the Electric Oil Pressure Gauge...I was told to use that Low Oil Pressure Sending unit, But Locating it is seriously irritating me (it's not right behind the oil filter as I was told) SO~ First off, Where is that unit in Referance TO the oil Filter??

Secondly on the list~ Fuel PRessure Gauge...Where do you tap into the fuel lines (if at all) to catch a reading from? AND What all do ya need as far as fittings/connections go??
 

·
Tech Specialist
Joined
·
1,496 Posts
Right next to where the oil feed line for the turbo comes out of the top of the oil filter there is a 1/8" npt plug. Put the sending unit there.

Get a tapped banjo bolt from geno's for the fuel pressure gauge.
 

·
Registered
Joined
·
554 Posts
Discussion Starter #3
And where does the banjo bolt plug in at??
 

·
Registered
Joined
·
1,011 Posts
VP44 Replacment
On the banjo bolt test port fitting on the VP44, thats where I'll probably tap my banjo bolt into.
 

·
Registered
Joined
·
554 Posts
Discussion Starter #5
Ill check that out...For the mean time; Im sure this is an easy thing to fix, but its driving me nuts! LOL
 
1 - 5 of 5 Posts
Top