[Shain89]

Yes sir, I’ll see if napa has one. Sinister, called them and they stopped selling delete kits. Maybe why the shop wasn’t in a good mood. I’ll do that Saturday. The factory fuel bowl. I’ll have to Google that. Sinister didn’t really have any advice on that.

Common issue. Replacing the O-Ring should fix the issue.

6.7L Ram Cummins MOPAR EGR Cooler O-ring 68211448 (genosgarage.com)

'09-'18 Ram 6.7L Cummins Standpipe to Cooler/Adapter O-Ring (glacierdieselpower.com)

Egr coolant bypass hose leak solution 6.7 cummins - YouTube

 

[Shain89]

Might take some searching, but try to find a product like those pictured below, i think people have been able to find them on Ebay since the EPA shutdown deletes. Issue is there isn't enough positive pressure holding it together, so the O-ring will eventually fail again, you need to be able to apply positive pressure

Leaking EGR delete coolant hose fix

So, first thing first, i have to give a shout out to Rich over @Glacier Diesel Power for helping me out on this one. 2 days ago, i found my coolant leak! it was the EGR delete coolant hose connection. what made this a real PITA to find, was that it was real intermittent to the leak was either...

www.cumminsforum.com

actually...just checked the links in that thread, still a live link with @Glacier Diesel Power so hopefully that fitting is still available, great fitting. Put one on my 12 to solve the issue as well

'09-'12 Billet Standpipe Heater Hose Adapter

'09-'12 Billet Standpipe Heater Hose Adapter

www.glacierdieselpower.com

This definitely looked like the best long term alternative. I ordered one, very pricey little thing after shipping. The more I looked at the design on the one I have I didn’t like it. I was questioning why it wasn’t a one piece braided line. If this adapter works I’ll be happy. Don’t want to be worried about coolant leaks when it’s summer. Thank you.

 

[Shain89]

You can do what you want with seafoam in the front fuel filter. It’s your money, but don’t put it in your fuel tank.
If you want water emulsion in your fuel and send it through your HPCR and injectors then have at it.
It’s not a 7.3 or a tractor.

I was looking because the fass setup and want to change those to Cat filters and do the factory bowl delete. I may run seafoam in the factory bowl before I remove it for the injectors. I have no clue on adding it to the fuel tank. Injector cleaners can be a topic if its own but I’ll take it into consideration and just run it into the filter for now till I know more on 6.7s. My question is to delete the bowl is all. Fleece I think makes the delete.

 

[Shain89]

I saw this but it maybe it’s on A newer model. I see why everyone was building on these inline Diesels. The V shape diesels are just hard to work on. I’ll miss my 7.3 didn’t want to get rid of it but a family member needed it. Currently I’m seeing that I should take delete the heater grid and clean that stuff up.Get that fuel bowl out of there. Less junk in the way the better. Mine was deleted around 55k… motor has pretty much no blow by. I don’t like the transmission tuning. I feel it shifts over 3-4th gear quick and would like all the gears to run through. Pretty sure that’s TDS tuning tho.

 

[Shain89]

I was waiting for a pretty day but finally got around to it. I left the mount that came with the egr kit for stability. The part from glacier wouldn’t grip the tubing. It was spinning around everything loose. I slightly filed the flats so it could grip to something. Don’t know if it would’ve hurt for it to have been loose but figure the o-ring would flatten out over time like the other with movement. I see other kits come with a throttle valve delete. Mine factory one is just unplugged. If the shop that did the work just didn’t want to do that but i guess I need to get a throttle valve delete. I hulled out the crankcase filter. I’ll see if it has any leaks after I buy some hose to run down the frame.

a man on here asked why I didn’t get rid of this so not to have o-ring problems anymore. I would rather have a solid braided line but so not see them or any information about it. I’ll see tomorrow. Hopefully no leaks. The o-ring in the old connector was flatted, worn out.