Dodge Cummins Diesel Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
I have read a few post saying they are around 1500 to 1650 rpms at 70mph. Mines is just over 1850. Is this correct . Hand calc on mpg is about 17.49. That's is over 5 tanks and 50/50 hwy/ city
 

· Registered
Joined
·
15,315 Posts
With 3.42 gears you should be at 72 MPH at 1625 RPM
 

· Premium Member
Joined
·
2,138 Posts
My SRW with 3.42's turn 1500 at 70.
 

· Registered
Joined
·
1,659 Posts
I'm going to guess your Tradesman came with 245/70/17 tires? Just like my '12 that is a ST (same as a '13 Tradesman) and all other trims that have 17' wheels come with 265/70/17 wrapped around them. That would be roughly a 150rpm difference, and the difference you see with RPM's compared to some others. All '13 SWR are 3.42's.

When I installed my 35" tires from my 245's, I went from 1800rpm @ 70mph to 1650rpm. This is with an auto tranny and a manual will be slightly higher rpm's.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top