[USMCoalRoller]

Blew out the gasket out of my intake plate. Never replaced one before and don't know where to start or any tricks to it. Any help is appreciated


Sent from AutoGuide.com Free App

 

[01CumminsPower01]

I've never done it myself either but maybe just take the bolts out an it'll wiggle right out? If not I imagine the lines have to come off an you'll be set


Sent from AutoGuide.com Free App

 

[Mopar1973Man]

Pulling injector lines isn't very hard at all. I would rather pull all the lines remove the plate right and make sure the surface is clean and that everything is lined up properly on the manifold again that trying to slide everything back under the lines and hop it lined up.

Mopar1973Man's Dodge Cummins Articles - High Pressure Injection Lines Removal

 

[97trxuszj]

Its not hard, pull injection lines off head, take all bolts out of the plate, remove plate, clean and reinstall everything. Remember gasket goes on dry no rtv or anything.

 

[strictlybiz]

It's very easy you can slide it out and slips the new one in its not glued