Dodge Cummins Diesel Forum banner

redwood acres-sled pulls

698 10
hey im gonna be running my truck in the redwood acres fair sled pulls and i was wondering if anybody had any pointers? i have a 6 spd manual with 5:32 gears( i believe) and i also have a TST powermax. what gear should i start in, what setting should i run my TST at and what psi or rpm should i launch at? any help would be great:thumbsup
1 - 11 of 11 Posts

· Registered
Joined
·
690 Posts
Discussion Starter · #4 ·
i have a heavy duty clutch... ran around with the TST set at 9/9 for a long time and the clutch started slippin like a..... so yea. and im probly just going to pull at local pulling events which would be maybe 4 times a year.
 

· Lifetime Premium Member
Joined
·
1,867 Posts
i pull mine in 4lo and 4th gear... i leave the sled at about 40 pounds of boost... the truck will let you know when you need to let it eat so to speak... but my DD is a hybrid ceramic, feramic combo on a 3850 pressure plate so i let mine slip then it hooks when i let it all out there and let er rip at 55psi...lol but im hard on mine!
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top