Dodge Cummins Diesel Forum banner

Rear u-joints

16435 Views 10 Replies 7 Participants Last post by  DavidB
A freind told me to get the 351a precision u-joint for $35 from napa rather then $65 for the one listed. Now I have the drive shaft out the old u-joint out and go to put the new one in and its too big. Stupid me for not holding them up to each other but, I have a half hour befor autozone closes. They do not have the one listed for the truck in stock does anyone know another part # that works?
1 - 11 of 11 Posts

· Registered
Joined
·
180 Posts
Discussion Starter · #2 ·
Only 15 min left please help me!!! I can make it there in 5
 

· Registered
Joined
·
2,747 Posts
i dont know but heres a bump..trying to help!!
 

· Registered
Joined
·
180 Posts
Discussion Starter · #4 ·
i dont know but heres a bump..trying to help!!
Too late now but thanks anyway. I will have to try and find one in the am. If anyone does know an alternat part # please let me know. Thanks
 

· Registered
Joined
·
76 Posts
U-joints

hey i made this list up when i was buying u-joints for my 05. not all these have been confirmed but i cross checked the manfacturers and this is what i came up with. hope this will give you a reference
Rear Drive Shaft Dodge-5003146AA/5093376AB Neapco-2-0054 Spicer-5-160X/5-462X Precision-330
Front Wheel Dodge-5086665AB/5086665AC Neapco-3-0485
Front Drive Shaft Single Cardan Dodge-5093377AB Neapco-2-3011. Spicer-5-3147X Precision-234/534G
Front Drive Shaft Double Cardan Dodge-5142222AA Neapco-2-1355 Precision-331A
 

· Registered
Joined
·
180 Posts
Discussion Starter · #6 ·
Rear Drive Shaft:
Dodge-5003146AA/5093376AB
Neapco-2-0054
Spicer-5-160X/5-462X
Precision-330

Looked a little funny at first. How come 2 # for dodge and spicer
 

· Registered
Joined
·
76 Posts
ok i did a little searching and from part desciptions it looks like the first one is for a drive shaft with the dana axle. the other one is for the 1 or 2 piece drive shaft on a bunch of different vehicles. the only ones i can garentee is the front wheel. the rest are still in my toolbox still waiting to be installed. the A on the joint you order mean s smaller snap ring
 

· Registered
Joined
·
269 Posts
carquest number is 2-0054 i thought it was 331 or 331a oriellys the NV5600 has a larger rear u joint than the 48re
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top