Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Cummins of the Month Challenge!
1 - 2 of 2 Posts

·
Registered
Joined
·
2,213 Posts
Discussion Starter · #1 ·
I just installed my universal raptor LP from rich at Glacier Diesel Power. Great pump and great customer service. Install was a breeze, and I am now seeing 20-21psi at idle, 18-19 at 65-75mph, and no less than 15psi at WOT. Its an awsome feeling knowing you have the correct psi at all times. Would highly recomend this pump for a guy looking for a LP on a budget
 

·
Registered
Joined
·
433 Posts
I just installed one of those too and I am real pleased with the quality and all the goodies that came with it.

With that pump installed you could build a vapor separator like I did using the stock filter canister. Mopar1973Man posted my write-up on his website for me. It will give you the benefit of air separation like FASS and AirDog with only a few dollars in parts.

Here it is. Air Separator

And here is the thread I started on the subject.http://www.cumminsforum.com/forum/9...-build-fuel-vapor-separator-your-2nd-gen.html
 
1 - 2 of 2 Posts
Top