Dodge Cummins Diesel Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter · #1 ·
I ran my truck with the twins and injectors for the first time last Friday and got a 12.85 @107 out of it. Pretty impressed with how it ran.

My egts were 1475 at the end of the track, and I could not leave at more than 15 psi becasue it would spin in 4wd and hop violently.

I do not know why my egts are so high with twins?

What kind of traction bars are out there? what is everyone using to make 4wds hook with out the hop?
 

·
Registered
Joined
·
131 Posts
Discussion Starter · #3 ·
I am running a hx 40 18 over a 3b 26, they are hellman twins I believe. I just changes out the 18 housing for a 16 yesterday, it seems to spool much better but it did not affect the egts
 

·
Premium Member
Joined
·
5,204 Posts
Nice numbers!! Those EGTs are not outlandish.
 

·
Registered
Joined
·
543 Posts
You may have low rail pressure....

I ran a 13.1 on 37's without going over 1250 with the same twins.
 

·
Registered
Joined
·
131 Posts
Discussion Starter · #7 ·
That is kinda what I was thinking. I have a air dog 150 on order and then I may do the CP3 mod, see how it goes
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top