Cummins Diesel Forum banner

Questions for the smart people.

528 Views 2 Replies 3 Participants Last post by  xcc_rider
My P2563 code is gone after cleaning the turbo, it cleared itself after 2 cans of turbo cleaner spray and a heavy romp up the freeway. I decided to unplug my EGR to stop the soot from being shoved back into my engine. Unplugging my EGR dropped my intake temp by 50+ degrees. Here’s the question, after unplugging the EGR I cleared the code. Should I have left the code in? Will clearing the code make something else think everything is ok and mess something up? What is the purpose of the throttle valve? Can I loose that too? Can I unplug the EGR thing on top of the cooler also?
1 - 1 of 3 Posts
In addition to what ME said,
If you continually clear the egr code you will have problems.
It will kinda confuse the ecm if you know what I mean.

The function of the TCV is to increase the egr flow. It closes off the intake to decrease the pressure. The decreased pressure allows for the increase in the egr flow when it needs it.
  • Like
Reactions: 1
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.