Dodge Cummins Diesel Forum banner
1 - 14 of 14 Posts

·
Where's my sparkplugs????
Joined
·
1,043 Posts
Discussion Starter · #1 · (Edited)
I was told by a few peeps that my Power Puck acts as a boost fooler, is this true? I was considering buying one but being told this I wanted to make sure. Thanks. :thumbsup
 

·
Registered
Joined
·
489 Posts
Bump for answer
 

·
Where's my sparkplugs????
Joined
·
1,043 Posts
Discussion Starter · #5 ·

·
Registered
Joined
·
1,166 Posts
Your boost fooler doesn't do anything for you?
Your never gonna belive me when I tell you this but everytime I put it on my power and smoke level drops all day long until it just plain stops smoking. We put it and another fooler on my buddys 04.5 with the same results. Its honestly spent 98% of its time in my glove box....
 

·
Premium Member
Joined
·
5,748 Posts
A boost fooler will keep your truck from Limping when the Puck is installed. We have seen manual G56 trucks go Limp when sled Pulling when using the Puck as a pressure adder, the Quad Fooler fixed that.

Stacking is an art, and it does not work the same on any two trucks

JMO
 

·
Premium Member
Joined
·
911 Posts
The power puck alone does not act as a boost fooler. That was the first power adder I had on my truck and I thought that it worked very well. I dropped a full second in the 1/4 mi from 16.5 stock to 15.35 with it on the high setting. A buddy of mine has an '05 dually and he runs a DS Predator with the puck and also Boost Fooler and he typically runs 40-42 psi of boost WOT. We tried the boost fooler on his truck with no programmer and it did not really do anything without any additional fuel.
 

·
Registered
Joined
·
518 Posts
boost

I would like to get a boost fooler but I guess on 03 early 04 CR's you need a adjustable boost elbow thingy

where do you get one?
 

·
Registered
Joined
·
19 Posts
i just ripped that stupid puck out of my truck and plan on smashin' it with a cat 992 loader!!! now i got a tick which i believe is coming from a worn out pressure relief valve. they are supposed to release at 26,500psi, and the puck can get pressures above that, once it happens, it's kind of like a circuit breaker that's been tripped too many times, and it will release at lower and lower pressure!
 

·
Registered
Joined
·
518 Posts
?

i just ripped that stupid puck out of my truck and plan on smashin' it with a cat 992 loader!!! now i got a tick which i believe is coming from a worn out pressure relief valve. they are supposed to release at 26,500psi, and the puck can get pressures above that, once it happens, it's kind of like a circuit breaker that's been tripped too many times, and it will release at lower and lower pressure!
I have heard many times on here all trucks react differently to the same mods.

My truck likes the puck:thumbsup
 

·
Tennesse Chapter President
Joined
·
1,603 Posts
I would like to get a boost fooler but I guess on 03 early 04 CR's you need a adjustable boost elbow thingy

where do you get one?
Ebay is where I got mine. $19. I can now boost at 38psi.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top