Joined
·
380 Posts
Just wondering what you guy's thought about stacking my PMT with a superchip flashpaq. good or bad idea or has any1 already tried it or running that combo??? any thought's????? 
eelout :beer
eelout :beer
PMT and SuperChips Flashpaq
-
March's Cummins of the Month challenge is now open for entries!
1 - 16 of 16 Posts
Joined
·
2,285 Posts
You cant run two flash style programs. You could do the PMT with a box like the edge,mp8, or diablo puck.
Joined
·
1,183 Posts
I didnt think you could run the PMT with an edge, The only thing that i know of that stacks with the PMT is the MP-8
Joined
·
2,285 Posts
Why couldnt you run it with an edge? Too much timing you think?
Joined
·
1,183 Posts
Idk i just didnt think they were compatable. anyone got and edge in Indiana that wants to experiment????
Joined
·
380 Posts
thanks guy's :beer eelout
eelout
Joined
·
2,622 Posts
You could, just not with the Attitude monitor.
Joined
·
5,035 Posts
The Juice Module isnt available with out the Attitude on the 6.7s (may be out of date info), both the PMT and the Attitude use the OBDII port.
Stack the MP-8 and you will be happy.
Stack the MP-8 and you will be happy.
Joined
·
2,285 Posts
Yeah Comp thats outdated info. The edge can come by itself with a 3 position switch part #30007 and then you have the edge w/attitude part #30107. :thumbsup
Joined
·
824 Posts
without the switch or moniter it's set to level two, thats what EDGE told me when i sent my attitude back for a reflash
Joined
·
1,183 Posts
Yea i think you get 65hp with just the box
Joined
·
2,285 Posts
Yep i wouldnt say it would be better than the MP8 either. Mp8 advertised at 100hp but im not sure if thats flywheel or rear wheel. Most say it doesnt product the power that it advertises.
Joined
·
9,082 Posts
That would be cool, PMT, Edge Box, & Mp8. Who is going to be the test rat? What do yall reckon it would dyno?
Joined
·
5,035 Posts
I ran the Pup with my Stack. Should be close.
1 - 16 of 16 Posts
