Cummins Diesel Forum banner

Overdrive wiring

1085 Views 6 Replies 4 Participants Last post by  1970Dodgeswap
I have a 1992 12 valve Automatic swapped into a 70 Crew cab. Control module deleted. I need to wire up the overdrive. Does anyone know how, wire colors from trans? all the info I can retrieve the better
1 - 4 of 7 Posts
So just feed the green wire with acc. Power and ground the blue with a switch?
So it ended up being a blue power wire and an orange with green stripe wire as ground. Both wires come right out of the drivers side of the Transmission. I ran an keyed acc.+ wire to the blue wire and the orange wire to a switch on the dash to ground. Works good. Thanks
  • Like
Reactions: 1
1 - 4 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.