[JeremyF]

Hey guys what oil filter wrench is everyone using. I have a few different types but neither of them are easy to use. I keep forgetting to ask untill its time to get the dang filter off. Thanks in advance

 

[oldseddie]

I use a filter 'socket' and several extensions on a ratchet wrench. After loosening the filter I drop it down by removing extensions until I can drain it into my catch pan. Didn't spill a drop last time!

Sent from my Nexus 9 using Tapatalk

 

[ron73440]

I use a strap wrench.

Going in from the top with no issues.

 

[Stormin08]

Strap wrench...or if the engine is cool, just grab it.

 

[KATOOM]

My filter wrench has a swivel on the handle which fits in tighter spots. I have no idea how long I've had it or where I got it either...

 

[bigfish95971]

I also use strap wrench. When installing oil the gasket and tighten to touch of gasket plus 1/2 to 3/4 turn by hand.

 

[Local2Ed]

I use what looks like a pair of Channel locks that have long C shaped jaws on it.
https://www.homedepot.com/p/Channellock-9-in-Oil-Filter-and-PVC-Slip-Joint-Pliers-209/202247297

 

[RT395]

I also use a simple strap wrench that has a swivel feature which makes it easier to use in tight spots.

It looks exactly like this one but I'm not sure on the size... it works good.

https://thd.co/2SQiJ1I

 

[brooklyn 12]

I use a filter 'socket' and several extensions on a ratchet wrench. After loosening the filter I drop it down by removing extensions until I can drain it into my catch pan. Didn't spill a drop last time!

^^^^^ pretty much the same here, 'Geno's Garage' has them & some other kinds :thumbsup:

 

[JeremyF]

Thanks guys. A few oil changes ago i had a small leak at the filter and had to give it a slight turn with a wrench to get it to stop. I always oil up the rubber gasket and tighten all my oil filters by hand. This one seems to leak if i dont give it a little extra past hand tight. Maybe i need to toughen up a little haha. Using fleetgaurd stratapore filter