Cummins Diesel Forum banner

oil change light

811 Views 6 Replies 6 Participants Last post by  camperman
I must not have the touch, but I changed my oil yesterday and have tried to reset the oil change light probably 30 times with no luck. Anyone have a trick to reseting this on the EVIC? :confused013: I may jsut drive it to the dealer and get it reset.
1 - 7 of 7 Posts
Turn key on, (don't start) push the gas pedal all the way to the floor 3 times, turn key off. Worked for me :thumbsup:
did you turn key on pump the accelerator 3 times?
Door has to be shut too I believe...
I have tried it standing on my head... with my hands instead of my foot...3 times... 4 times... 5 times.... fast... Slow... with my left foot and my right. it is driving me crazy. I did not know if the programmer had anything to do with it not reseting. I would not think so.
Thanks for the replies fellas
I just did it a few weeks ago. Turn the truck on BUT wait till the message comes up 1st then do the pedal pump. Not sure why but if just do it right away before the message pops up it will not work.
Turn key on, do not start. Push go pedal completely to floor 3 times, WITHIN 10 seconds. Turn key off. That is how I reset sig truck. Hope this helps.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.