Cummins Diesel Forum banner

nv5600 shifter

2195 Views 9 Replies 4 Participants Last post by  4x4kingx889
just wondering who has gotten into there shifter as far as rebuilding it. seems to have a good amount of slop when its in gear. just wondered if i can just rebuild the shift tower like in a kenworth or pete truck if its similiar
1 - 3 of 10 Posts
you know there's a rubber bushing in the shifter handle itself?
that gives flex play in whole handle...
I welded around that bushing, so I got less flex and precise shifting but tranny noise is more noticeable thru the hollow shifter tube since is one body now, as well vibration goes back into your wrist since there no more bushing, I'm not sure if I like it...
its a pain in the neck to get it out, everything twits around the rubber...
1 - 3 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.