[Jmiket]

I’m down to the last electrical issues on the truck! I have turn signals, no brake lights, no hazards, no reverse lights. The reverse lights I’m pretty sure is the switch on the trans (5speed) all fuses are good, bulbs are Good. Little lost, got Half a mind to replace the multifunction switch and see what happens!

 

[Jmiket]

I got hazards back, loose fitting relay. So I’ve cut the trailer light harness out, trailer brake harness out, replaced all fuses in the fuse box for the hell of it, brake switch behind the pedal, bulbs and still no brake lights. Anybody have any ideas???

 

[bigfish95971]

With some bad connections, it is hard to say what others there may be. I would check all on the PDC and Multifunction switch and brake light switch. before replacing it. Cutting out trailer light wires probably did not help.

 

[Junkman]

Every wire and connection with location is in the FSM. Start at one end and move to the next connection until you find where current drops out. What year truck?

 

[Jmiket]

Every wire and connection with location is in the FSM. Start at one end and move to the next connection until you find where current drops out. What year truck?

1998.5 5 speed 24v

 

[Junkman]

99 FSM good to 00 for trucks with a crank sensor https://www.dropbox.com/s/s7xwosy8araaub0/1999 DodgeRam.pdf?dl=0

01 FSM https://www.dropbox.com/s/uz84y478b5dn70u/2001ramsrvcmanual.zip?dl=0

I think they both are complete.