Dodge Cummins Diesel Forum banner

no charge

1076 Views 6 Replies 4 Participants Last post by  rwms498
i put a new battery and voltage regulator on in december when it was over charging and it fixed it but now its not charging it'll say on the gauge half way then it'll gradually drop and lose all power i replaced the alternator last night and it does the same thing any ideas thanks
1 - 7 of 7 Posts

· Registered
Joined
·
807 Posts
regulator? i would try another volt gauge just to make sure but it might be the regulator. did you replace it with a genaric or mopar part?
 

· Registered
Joined
·
807 Posts
these dont have cam sensors. these only have crank position sensor. and i didnt think yours would either but i dont know much about the newer ones.
 

· Registered
Joined
·
48 Posts
well its a postition sensor of some sort i cant remember but it tells the ecm that the engine is turning so it will charge thats how my 93 was
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top