Cummins Diesel Forum banner

No brake lights!!!

566 Views 2 Replies 2 Participants Last post by  Dusty310
Ok so today I noticed that I had no brake lights but all other lights worked,so I checked all fuses and checked good. I replaced brake light switch and noticed that I have one hot wire only when the ignition is on and the brake switch unplugged. When I plug the brake switch in I have no hot wires??? Any help for the newbie would be greatly appreciated!
1 - 3 of 3 Posts
I would check wires on the lights themselves, i had a loose ground which caused mine not to work.
Thanks for the reply I will check and I will also add that if I use the button on my brake controller the brake lights work like they should,
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.