Dodge Cummins Diesel Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
64 Posts
Discussion Starter · #1 · (Edited)
I have a 2012 2500 and I'm going to be ordering some new wheels and tire tomorrow and i just want to make sure that they are going to work. I don't have a leveling kit yet but the first of the year I will be getting one.the tires and wheels are 20x9 FUEL HOSTAGE D531 w/ Nitto Trail Grappler MT 295/60R20 Tires. I think the off set is 0 or +1
 

· Registered
Joined
·
614 Posts
ill bet they rub on the back of fender some but they should fit.
 

· Registered
Joined
·
3,177 Posts
If the offset is 0mm or +1mm they should fit easily.
 

· Registered
Joined
·
141 Posts
And how Far would stick out with a +20 offset
Wheels will stick out farther with negative offset. For example, I have 20x10 Fuel Hostages with a -12 offset. They stick out a little over an inch. 0 offset will be about even with the fender. Maybe a little outside.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top