Cummins Diesel Forum banner

MP-8 Installation HELP!...Strange

720 Views 9 Replies 5 Participants Last post by  crazzycummins6.7
Ok guys I know this is a problem for alot of people but I think mine is an easy one. So I bought my mp-8 used from a guy and he did not give me the shims. He said he called and talked to ts-performance to get the correct ones but im thinking no. What size should they be? Dont they need to go deep into the plug where the spring sits? the ones he gave me are almost a 1/2 in. Way too big, so my question is can I just go to the hardware store and pick up some brass or stainless ones that will fit. How perfect do these need to be?

1 - 2 of 10 Posts
They should be 3 - #4 washers. Any hardware store may have them. Yes it needs to be installed behind the spring.
Good to hear its going now.
1 - 2 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.