Dodge Cummins Diesel Forum banner
1 - 6 of 33 Posts

· Registered
Joined
·
135 Posts
Discussion Starter · #1 ·
I was watching on youtube and seen an 89 non IC dodge that got about 430HP and 730TQ and was wondering what it takes to get these kind of power numbers out of a VE pump???
I have a 92 IC dodge and was just wondering a way to get more power and what other people out there have done.
 

· Registered
Joined
·
135 Posts
Discussion Starter · #9 ·
My truck has the pump turned up and advanced timing

http://www.youtube.com/watch?v=3A345he8yK0

Just wondering what you guys think he may have done and if you read in the info there is no IC and no water/Meth.
 

· Registered
Joined
·
135 Posts
Discussion Starter · #17 ·
So that truck had twins and injectors??? and thats it
 

· Registered
Joined
·
135 Posts
Discussion Starter · #20 ·
So how much power could you make with just 6x16 and an HX35
 

· Registered
Joined
·
135 Posts
Discussion Starter · #29 ·
So 6x16s and enough air I could make 300 to 400 horse with the VE pump and would I need to upgrade the lift pump for the bigger injectors and where is a good place to get some 6x16s
 

· Registered
Joined
·
135 Posts
Discussion Starter · #31 ·
There is a fuel screw on the back of the pump and yes it does cause black smoke but it also gives more boost and power but before doing to much you will want to get some gauges so you dont melt the motor
 
  • Like
Reactions: DIESELDREW24
1 - 6 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top